Replacing label roll in Open C20 gun

Step 1: Open the baseplate by sliding the two plastic grips, one on each side of the body of the gun, towards you. The baseplate will fall open automatically.

Step 2: Open the label-roll holder by pulling it upwards slightly.

Step 3: Unroll approximately a 20cm strip of the label and insert it into the top of the gun, guiding the strip gently until it comes out of the bottom.  The labels need to be facing upwards.

Step 4: Insert the roll of labels into the roll holder. Now close the roll holder.

Step 5: Close the baseplate, making sure that at least 15cm of the label strip remains free.

Step 6: Remove the labels from the strip. This helps the labels from getting jammed in the gun for the next step.

Step 7: Insert the strip of labels UNDER the silver roller, pushing it in slightly

Step 8: Push the backing paper into the gun (where you placed it under the silver roller), and at the same time click the trigger a few times and the backing paper will come out the bottom near the handle.