Replacing a label roll in Jolly JH8 gun

Written Instructions:

Step 1: Open the label roll holder, pull upwards using the hole provided.

Step 2: Open the base plate by turning the gun upside down and pulling down on the rounded end of the base plate 

Step 3: Open the inner part with the gold roller.

Step 4: To help guide the roll of labels through the gun, it helps to make a slight fold lengthways at the very beginning of the roll

Step 5: Insert the roll of labels onto the label holder & slide the labels through the gun so that the labels are facing upwards.

Step 6:  Close the roll spool/label holder by pushing down until you hear it click shut.

Step 7: Pull the labels through the gun, and pull out approximately 10 cm of label. 

Step 8: Close the inner base plate and then the outer base plate, making sure you keep the labels central

Step 9: Pull the trigger a few times for the labels to come out.