Replace ink roller in Jolly JH8 gun

Written Instructions:

Step 1: To change the ink roller in your Jolly Gun, open the front cover by pulling it outwards. 

Step 2: The cleanest way to remove the ink roller is by using a flathead screwdriver. Place the screwdriver between the piece of this plastic shown below and gently wedge it out. The ink roller will pop out. 

Step 3: Remove the new ink roller from the packaging and press it gently into the ink roller holder in the two slots on either side of the holder until it clicks into place.

Step 4:  Close the ink roller holder cover.